Raspi mit SD Karte?, evtl . ist die kaputt. das hatte ich mal mit Symcon, jedesmal nach einem Reboot war ich auf einem alten Stand
Hallo,
ich bekommen keine Daten vom Mäher nach IP-Symcon, obwohl die Bridge scheinbar funktioniert. Ich habe zwei Mäher, davon einen aktiv - habe testweise mal einen aus der Config rausgenommen, aber das hat nicht geholfen. Service neu starten hat auch nicht geholfen.
Das einzige was sich regelmäßg in IPS ändert ist die „offline“ / „online“ Anzeige.
Hier mal die Auszüge aus den Logs & Debugs:
Hat jemand eine Idee woran das liegen kann?
VG Thorsten
Hallo Thorsten,
wie ist denn dein 2. Mäher konfiguriert? Für den musst du ein zweites Topic vergeben. Das darf nicht gleich zum ersten sein.
Ansonsten sieht das Debug perfekt aus. So müsste die Bridge durchgängig online anzeigen.
Grüße
Jürgen
Sagt euch die Meldung was ?
24.04.2023, 20:12:54 | FlowHandler | Kann Daten nicht zur Instanz #27786 weiterleiten:
Warning: Point hat denselben Start wie PointID 2 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 302
Warning: Point hat denselben Start wie PointID 2 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 302
Warning: Point hat denselben Start wie PointID 2 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 295
Warning: Point hat denselben Start wie PointID 2 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 302
Warning: Point hat denselben Start wie PointID 2 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 295
Warning: Point hat denselben Start wie PointID 2 in /mnt/data/symcon/modules/.store/silberstreifen.mqtt.worx/Scheduler/module.php on line 302
RESULT:
Der Pi läuft als virtuelle Maschine, daher kann ich eine defekte SD Karte ausschließen.
Vielen Dank für deine Unterstützung
am besten, du löscht den Wochenplan in Symcon. Der wird dann ja automatisch wieder angelegt. Dann sollte der Spuk eigentlich wieder vorbei sein, es sei denn, dass du tatsächlich einen unsinnigen Plan (mehrere Termine an einem Tag mit gleichem Startpunkt) beim Worx einprogrammiert hast.
Danke dir passt wieder
Hallo Jürgen,
seit gestern um 21:53h klappt es wieder - ohne, dass ich etwas verändert habe… hier mal das Log der Bridge - vielleicht hast du eine Idee warum?
Vg Thorsten
24/04/2023, 21:47:42 DEBUG: Mower xxxxxxxxxxxx is online
24/04/2023, 21:53:02 INFO: Restart Mqtt after 24h
24/04/2023, 21:53:02 DEBUG: {"id":472839,"user_type":"customer","push_notifications":true,"location":null,"mqtt_endpoint":"a1optpg91s0ydf-ats.iot.eu-west-1.amazonaws.com","actions_on_google_pin_code":null,"created_at":"2021-07-06 18:59:35","updated_at":"2023-04-22 12:35:38"}
24/04/2023, 21:53:03 DEBUG: MQTT connected to: iot.eu-west-1.worxlandroid.com
24/04/2023, 21:53:03 DEBUG: Worxcloud MQTT subscribe to DB504/0023A7582ACB/commandOut
24/04/2023, 21:53:03 DEBUG: Worxcloud MQTT subscribe to PRM100/98D86331BDA2/commandOut
24/04/2023, 21:53:05 DEBUG: NEW Message for PRM100/98D86331BDA2/commandOut: {"cfg":{"id":1,"lg":"en","tm":"21:53:02","dt":"24/04/2023","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["11:00",30,1],["11:00",30,1],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":120,"sn":"xxxxxxxxxxxxx","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"98D86331BDA2","fw":3.28,"fwb":1,"bt":{"t":10.6,"v":19.29,"p":100,"nr":358,"c":0,"m":0},"dmp":[3.3,-3.1,62.2],"st":{"b":27518,"d":428770,"wt":28522,"bl":83},"ls":1,"le":0,"lz":0,"rsi":-
hm, ggf. warst du von Worx für 24h gesperrt. Aber schön, dass es wieder funktioniert
Hallo Jürgen,
leider zu früh gefreut - seit gestern 17.11h klappt es wieder nicht mehr. Hier mal der Bridge Log. Könnte es sein, dass ich geblocked werde? Und wenn ja warum?
25/04/2023, 17:07:45 DEBUG: {"id":351380,"uuid":"96c52e17-01b3-4002-a821-2b48da14e020","product_id":49,"user_id":xxxxx,"serial_number":"zzzzzzz","mac_address":"98D86331BDA2","name":"M 1","locked":true,"firmware_version":3.28,"firmware_auto_upgrade":true,"push_notifications":true,"sim":null,"push_notifications_level":"warning","test":false,"iot_registered":true,"mqtt_registered":true,"pin_code":"2304","registered_at":"2019-05-24 00:00:00","online":true,"app_settings":null,"protocol":0,"pending_radio_link_validation":null,"capabilities":["auto_lock","digital_fence_settings","lock","mqtt","multi_zone","multi_zone_percentage","one_time_scheduler","pairing_smartlink","pause_over_wire","rain_delay","rain_delay_start","safe_go_home","scheduler_two_slots","unrestricted_mowing_time"],"capabilities_available":[],"features":{"auto_lock":3.25,"chassis":"m_2019","digital_fence_settings":3.25,"display_type":"tube","input_type":"keyboard_tube","lock":true,"mqtt":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"one_time_scheduler":3.15,"pause_over_wire":3.26,"rain_delay":true,"rain_delay_start":3.08,"safe_go_home":3.25,"scheduler_two_slots":3.15,"unrestricted_mowing_time":true,"wifi_pairing":"smartlink"},"accessories":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"PRM100/98D86331BDA2/commandIn","command_out":"PRM100/98D86331BDA2/commandOut"},"warranty_registered":true,"purchased_at":"2019-05-22 00:00:00","warranty_expires_at":"2022-05-22 00:00:00","setup_location":{"latitude":49.27515948,"longitude":8.59441341},"city":{"id":3272456,"country_id":276,"name":"Sankt Leon-Rot","latitude":49.266392,"longitude":8.61667,"created_at":"2018-02-15 22:09:24","updated_at":"2018-02-15 22:09:24"},"time_zone":"Europe/Berlin","lawn_size":null,"lawn_perimeter":83,"auto_schedule_settings":null,"auto_schedule":false,"improvement":true,"diagnostic":true,"distance_covered":428770,"mower_work_time":28522,"blade_work_time":27518,"blade_work_time_reset":null,"blade_work_time_reset_at":null,"battery_charge_cycles":358,"battery_charge_cycles_reset":null,"battery_charge_cycles_reset_at":null,"created_at":"2019-03-11 12:55:07","updated_at":"2023-04-23 01:11:28","last_status":{"timestamp":"2023-04-25 15:04:19","payload":{"cfg":{"id":0,"sn":"zzzzzzz","dt":"25/04/2023","tm":"17:04:17","lg":"en","cmd":0,"sc":{"m":1,"d":[["11:00",30,1],["11:00",30,1],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"distm":0,"p":0,"ots":{"wtm":0,"bc":0}},"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":120,"al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"98D86331BDA2","fw":3.28,"fwb":1,"ls":7,"le":0,"conn":"wifi","bt":{"t":13,"v":19.48,"p":100,"nr":358,"c":0,"m":1},"dmp":[-1.4,0.3,27.9],"st":{"b":27521,"d":428819,"wt":28526,"bl":83},"act":1,"rsi":-63,"lk":1,"tr":0,"lz":0,"rain":{"s":0,"cnt":0}}}},"last_gps_status":null}
25/04/2023, 17:07:45 DEBUG: Mower zzzzzzz is online
25/04/2023, 17:09:20 DEBUG: Worxcloud MQTT offline
25/04/2023, 17:09:20 DEBUG: mqtt closed
25/04/2023, 17:09:25 DEBUG: MQTT reconnect
25/04/2023, 17:09:25 DEBUG: MQTT connected to: iot.eu-west-1.worxlandroid.com
25/04/2023, 17:09:25 DEBUG: Worxcloud MQTT subscribe to DB504/0023A7582ACB/commandOut
25/04/2023, 17:09:25 DEBUG: Worxcloud MQTT subscribe to PRM100/98D86331BDA2/commandOut
25/04/2023, 17:09:28 DEBUG: NEW Message for PRM100/98D86331BDA2/commandOut: {"cfg":{"id":1,"lg":"en","tm":"17:09:25","dt":"25/04/2023","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["11:00",30,1],["11:00",30,1],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":120,"sn":"zzzzzzz","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"98D86331BDA2","fw":3.28,"fwb":1,"bt":{"t":13.2,"v":19.11,"p":100,"nr":358,"c":0,"m":1},"dmp":[4.7,1.4,121.8],"st":{"b":27526,"d":428892,"wt":28531,"bl":83},"ls":7,"le":0,"lz":0,"rsi":-49,"lk":1,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":132,"l":132}}}
25/04/2023, 17:09:28 DEBUG: Worxcloud MQTT get Message for mower M 1 (zzzzzzz)
25/04/2023, 17:09:28 DEBUG: Data for zzzzzzz: {"cfg":{"id":1,"lg":"en","tm":"17:09:25","dt":"25/04/2023","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["11:00",30,1],["11:00",30,1],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":120,"sn":"zzzzzzz","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"98D86331BDA2","fw":3.28,"fwb":1,"bt":{"t":13.2,"v":19.11,"p":100,"nr":358,"c":0,"m":1},"dmp":[4.7,1.4,121.8],"st":{"b":27526,"d":428892,"wt":28531,"bl":83},"ls":7,"le":0,"lz":0,"rsi":-49,"lk":1,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":132,"l":132}}}
25/04/2023, 17:09:28 DEBUG: Set new timestamp
25/04/2023, 17:11:25 DEBUG: NEW Message for PRM100/98D86331BDA2/commandOut: {"cfg":{"id":0,"lg":"en","tm":"17:11:23","dt":"25/04/2023","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["11:00",30,1],["11:00",30,1],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":120,"sn":"zzzzzzz","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"98D86331BDA2","fw":3.28,"fwb":1,"bt":{"t":13.3,"v":19.06,"p":100,"nr":358,"c":0,"m":1},"dmp":[3.1,0.1,30.0],"st":{"b":27528,"d":428918,"wt":28533,"bl":83},"ls":7,"le":0,"lz":0,"rsi":-66,"lk":1,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":131,"l":131}}}
25/04/2023, 17:11:25 DEBUG: Worxcloud MQTT get Message for mower M 1 (zzzzzzz)
25/04/2023, 17:11:25 DEBUG: Data for zzzzzzz: {"cfg":{"id":0,"lg":"en","tm":"17:11:23","dt":"25/04/2023","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["11:00",30,1],["11:00",30,1],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":120,"sn":"zzzzzzz","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"98D86331BDA2","fw":3.28,"fwb":1,"bt":{"t":13.3,"v":19.06,"p":100,"nr":358,"c":0,"m":1},"dmp":[3.1,0.1,30.0],"st":{"b":27528,"d":428918,"wt":28533,"bl":83},"ls":7,"le":0,"lz":0,"rsi":-66,"lk":1,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":131,"l":131}}}
25/04/2023, 17:11:25 DEBUG: Set new timestamp
25/04/2023, 17:17:45 DEBUG: {"id":50923,"uuid":"96c52f0f-ca69-4002-b8c2-0cbb9a38955d","product_id":11,"user_id":xxxxx,"serial_number":"3zzzzzzz","mac_address":"0023A7582ACB","name":"M","locked":false,"firmware_version":5.25,"firmware_auto_upgrade":true,"push_notifications":false,"sim":null,"push_notifications_level":"warning","test":false,"iot_registered":true,"mqtt_registered":true,"pin_code":"2507","registered_at":"2016-09-01 00:00:00","online":false,"app_settings":null,"protocol":0,"pending_radio_link_validation":null,"capabilities":["mqtt","multi_zone","multi_zone_percentage","pairing_udp_broadcast","rain_delay","unrestricted_mowing_time"],"capabilities_available":[],"features":{"chassis":"m_2016","display_type":"lcd","input_type":"keyboard_numeric","mqtt":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"rain_delay":true,"unrestricted_mowing_time":true,"wifi_pairing":"udp_broadcast"},"accessories":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"DB504/0023A7582ACB/commandIn","command_out":"DB504/0023A7582ACB/commandOut"},"warranty_registered":true,"purchased_at":"2016-07-20 00:00:00","warranty_expires_at":"2018-07-20 00:00:00","setup_location":{"latitude":49.2749183,"longitude":8.59498595},"city":{"id":3272456,"country_id":276,"name":"Sankt Leon-Rot","latitude":49.266392,"longitude":8.61667,"created_at":"2018-02-15 22:09:24","updated_at":"2018-02-15 22:09:24"},"time_zone":"Europe/Berlin","lawn_size":250,"lawn_perimeter":null,"auto_schedule_settings":{"boost":2,"exclusion_scheduler":{"days":[{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false}],"exclude_nights":true},"grass_type":null,"irrigation":null,"nutrition":null,"soil_type":null},"auto_schedule":false,"improvement":false,"diagnostic":false,"distance_covered":398425,"mower_work_time":29700,"blade_work_time":27758,"blade_work_time_reset":0,"blade_work_time_reset_at":null,"battery_charge_cycles":25811,"battery_charge_cycles_reset":0,"battery_charge_cycles_reset_at":null,"created_at":"2017-08-16 06:38:37","updated_at":"2022-08-11 16:03:33","last_status":{"timestamp":"2023-04-19 07:34:58","payload":{"cfg":{"sn":"3zzzzzzz","dt":"19/04/2023","tm":"09:35:15","lg":"de","cmd":0,"sc":{"m":1,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"p":10},"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0},"dat":{"mac":"0023A7582ACB","fw":5.25,"ls":0,"le":11,"bt":{"t":20.1,"v":27.37,"p":100,"nr":25811,"c":0},"dmp":[-20,-42,92],"st":{"b":27758,"d":398425,"wt":29700},"rsi":53,"lk":0,"lz":0}}},"last_gps_status":null}
25/04/2023, 17:17:45 DEBUG: Mower 3zzzzzzz is offline
25/04/2023, 17:17:45 DEBUG: {"id":351380,"uuid":"96c52e17-01b3-4002-a821-2b48da14e020","product_id":49,"user_id":xxxxx,"serial_number":"zzzzzzz","mac_address":"98D86331BDA2","name":"M 1","locked":true,"firmware_version":3.28,"firmware_auto_upgrade":true,"push_notifications":true,"sim":null,"push_notifications_level":"warning","test":false,"iot_registered":true,"mqtt_registered":true,"pin_code":"2304","registered_at":"2019-05-24 00:00:00","online":true,"app_settings":null,"protocol":0,"pending_radio_link_validation":null,"capabilities":["auto_lock","digital_fence_settings","lock","mqtt","multi_zone","multi_zone_percentage","one_time_scheduler","pairing_smartlink","pause_over_wire","rain_delay","rain_delay_start","safe_go_home","scheduler_two_slots","unrestricted_mowing_time"],"capabilities_available":[],"features":{"auto_lock":3.25,"chassis":"m_2019","digital_fence_settings":3.25,"display_type":"tube","input_type":"keyboard_tube","lock":true,"mqtt":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"one_time_scheduler":3.15,"pause_over_wire":3.26,"rain_delay":true,"rain_delay_start":3.08,"safe_go_home":3.25,"scheduler_two_slots":3.15,"unrestricted_mowing_time":true,"wifi_pairing":"smartlink"},"accessories":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"PRM100/98D86331BDA2/commandIn","command_out":"PRM100/98D86331BDA2/commandOut"},"warranty_registered":true,"purchased_at":"2019-05-22 00:00:00","warranty_expires_at":"2022-05-22 00:00:00","setup_location":{"latitude":49.27515948,"longitude":8.59441341},"city":{"id":3272456,"country_id":276,"name":"Sankt Leon-Rot","latitude":49.266392,"longitude":8.61667,"created_at":"2018-02-15 22:09:24","updated_at":"2018-02-15 22:09:24"},"time_zone":"Europe/Berlin","lawn_size":null,"lawn_perimeter":83,"auto_schedule_settings":null,"auto_schedule":false,"improvement":true,"diagnostic":true,"distance_covered":428770,"mower_work_time":28522,"blade_work_time":27518,"blade_work_time_reset":null,"blade_work_time_reset_at":null,"battery_charge_cycles":358,"battery_charge_cycles_reset":null,"battery_charge_cycles_reset_at":null,"created_at":"2019-03-11 12:55:07","updated_at":"2023-04-23 01:11:28","last_status":{"timestamp":"2023-04-25 15:13:56","payload":{"cfg":{"id":2,"sn":"zzzzzzz","dt":"25/04/2023","tm":"17:13:54","lg":"en","cmd":0,"sc":{"m":1,"d":[["11:00",30,1],["11:00",30,1],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"distm":0,"p":0,"ots":{"wtm":0,"bc":0}},"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":120,"al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"98D86331BDA2","fw":3.28,"fwb":1,"ls":7,"le":0,"conn":"wifi","bt":{"t":13.4,"v":18.82,"p":95,"nr":358,"c":0,"m":1},"dmp":[-0.2,-8.8,197.6],"st":{"b":27530,"d":428959,"wt":28535,"bl":83},"act":1,"rsi":-52,"lk":1,"tr":0,"lz":0,"rain":{"s":0,"cnt":0}}}},"last_gps_status":null}
25/04/2023, 17:17:45 DEBUG: Mower zzzzzzz is online
25/04/2023, 17:18:10 DEBUG: Worxcloud MQTT offline
25/04/2023, 17:18:10 DEBUG: mqtt closed
25/04/2023, 17:18:15 DEBUG: MQTT reconnect
25/04/2023, 17:18:15 DEBUG: mqtt closed
25/04/2023, 17:18:25 DEBUG: MQTT reconnect
25/04/2023, 17:18:26 DEBUG: mqtt closed
25/04/2023, 17:18:46 DEBUG: MQTT reconnect
25/04/2023, 17:18:46 DEBUG: mqtt closed
25/04/2023, 17:19:26 DEBUG: MQTT reconnect
25/04/2023, 17:19:26 DEBUG: mqtt closed
25/04/2023, 17:20:46 DEBUG: MQTT reconnect
25/04/2023, 17:20:46 DEBUG: mqtt closed
25/04/2023, 17:22:37 DEBUG: Refresh token
25/04/2023, 17:22:38 DEBUG: {"token_type":"Bearer","expires_in":3600,"access_token":"eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiJ9.eyJhdWQiOiIxNTBkYTRkMi1iYjQ0LTQzM2ItOTQyOS0zNzczYWRjNzBhMmEiLCJqdGkiOiI0MTNkYTA0NTkxMjA4MTYyODU1NWViZWU2NjlkZTg1MGRmOWE1ZGYwZTMzNzhjMzlhOTIzNDI3ZjQ2OWZhNWEzMWNkMGViMDM1OWE1N2E5NCIsImlhdCI6MTY4MjQzNjE1OC4xNjg4MjUsIm5iZiI6MTY4MjQzNjE1OC4xNjg4MjcsImV4cCI6MTY4MjQzOTc1OCwic3ViIjoiNDcyODM5Iiwic2NvcGVzIjpbImRhdGE6cHJvZHVjdHMiLCJtb2JpbGU6bm90aWZpY2F0aW9ucyIsIm1vd2VyOmFjdGl2aXR5X2xvZyIsIm1vd2VyOmZpcm13YXJlIiwibW93ZXI6bGF3biIsIm1vd2VyOnBhaXIiLCJtb3dlcjp1bnBhaXIiLCJtb3dlcjp1cGRhdGUiLCJtb3dlcjp2aWV3IiwibW93ZXI6d2FycmFudHkiLCJ1c2VyOmNlcnRpZmljYXRlIiwidXNlcjptYW5hZ2UiLCJ1c2VyOnByb2ZpbGUiXX0.erlnopU_qBJYYenZiJd5SnvGtjHRLb4sksDywBVwNynSZtS56WVWnNsizL0ATR7SRPCe1K7g7mXFDeX8Y4iw4UX-DBOI6Jjf1eyybDBfyoLd_JIWXKuTLVGpq8xew5h1j2a3kWJfcEh_H1cXv0Od1w5jmdvlnrcyM85z6XCbWqD_zht7aFMe6ZTodvcKcXnOKZucPvKA6GchL8HCWSxCt-uyqa4ys-6VSRrsOycbdOg5TwD-Th6xKn7MZSXbNHfTB03kTKB0_TYRiGGdY-ZJoQCllPrFyDgT3gQt7iytqkq1c1CStRUr4rArb6WNT98WdWoYCd9Jx1Bfp_gO5wqPcSP00xL_s0Yhb25s2nqDnjz8diXjFiiQmeH379w7SMjTzJHZo0cQ2p7kDfiGd6FHMYLCZNLLC4MiMJYOqjlmJvCyKXMOluBQRFsunfV_a3OOXymOYeu_JMQpNCePL7lgyLT0QB6zBRxR42zcBJ9AZ6QHrCF93kPo-IgWy0bC5ikS8-Yi-SrvS9IaogyPTMfiouGMENLX9s-LfxGynzz8b3iGa82HAL8t2z0ze30qydMPidJRuQyLh8fZwfP1wo5caj0QLLmbJeteUOq9MUvxT0U-IIQ7NTrqWaWX801xe8yvA0rzgE7npkkuqbZRF_7oD_5fmwKXCRRhYNdgIDbb1zI","refresh_token":"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"}
25/04/2023, 17:22:54 DEBUG: MQTT reconnect
25/04/2023, 17:22:54 DEBUG: mqtt closed
25/04/2023, 17:25:02 DEBUG: MQTT reconnect
25/04/2023, 17:25:03 DEBUG: mqtt closed
25/04/2023, 17:27:11 DEBUG: MQTT reconnect
25/04/2023, 17:27:11 DEBUG: mqtt closed
25/04/2023, 17:27:45 DEBUG: {"id":50923,"uuid":"96c52f0f-ca69-4002-b8c2-0cbb9a38955d","product_id":11,"user_id":xxxxx,"serial_number":"3zzzzzzz","mac_address":"0023A7582ACB","name":"M","locked":false,"firmware_version":5.25,"firmware_auto_upgrade":true,"push_notifications":false,"sim":null,"push_notifications_level":"warning","test":false,"iot_registered":true,"mqtt_registered":true,"pin_code":"2507","registered_at":"2016-09-01 00:00:00","online":false,"app_settings":null,"protocol":0,"pending_radio_link_validation":null,"capabilities":["mqtt","multi_zone","multi_zone_percentage","pairing_udp_broadcast","rain_delay","unrestricted_mowing_time"],"capabilities_available":[],"features":{"chassis":"m_2016","display_type":"lcd","input_type":"keyboard_numeric","mqtt":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"rain_delay":true,"unrestricted_mowing_time":true,"wifi_pairing":"udp_broadcast"},"accessories":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"DB504/0023A7582ACB/commandIn","command_out":"DB504/0023A7582ACB/commandOut"},"warranty_registered":true,"purchased_at":"2016-07-20 00:00:00","warranty_expires_at":"2018-07-20 00:00:00","setup_location":{"latitude":49.2749183,"longitude":8.59498595},"city":{"id":3272456,"country_id":276,"name":"Sankt Leon-Rot","latitude":49.266392,"longitude":8.61667,"created_at":"2018-02-15 22:09:24","updated_at":"2018-02-15 22:09:24"},"time_zone":"Europe/Berlin","lawn_size":250,"lawn_perimeter":null,"auto_schedule_settings":{"boost":2,"exclusion_scheduler":{"days":[{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false},{"slots":[],"exclude_day":false}],"exclude_nights":true},"grass_type":null,"irrigation":null,"nutrition":null,"soil_type":null},"auto_schedule":false,"improvement":false,"diagnostic":false,"distance_covered":398425,"mower_work_time":29700,"blade_work_time":27758,"blade_work_time_reset":0,"blade_work_time_reset_at":null,"battery_charge_cycles":25811,"battery_charge_cycles_reset":0,"battery_charge_cycles_reset_at":null,"created_at":"2017-08-16 06:38:37","updated_at":"2022-08-11 16:03:33","last_status":{"timestamp":"2023-04-19 07:34:58","payload":{"cfg":{"sn":"3zzzzzzz","dt":"19/04/2023","tm":"09:35:15","lg":"de","cmd":0,"sc":{"m":1,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"p":10},"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0},"dat":{"mac":"0023A7582ACB","fw":5.25,"ls":0,"le":11,"bt":{"t":20.1,"v":27.37,"p":100,"nr":25811,"c":0},"dmp":[-20,-42,92],"st":{"b":27758,"d":398425,"wt":29700},"rsi":53,"lk":0,"lz":0}}},"last_gps_status":null}
25/04/2023, 17:27:45 DEBUG: Mower 3zzzzzzz is offline
25/04/2023, 17:27:45 DEBUG: {"id":351380,"uuid":"96c52e17-01b3-4002-a821-2b48da14e020","product_id":49,"user_id":xxxxx,"serial_number":"zzzzzzz","mac_address":"98D86331BDA2","name":"M 1","locked":true,"firmware_version":3.28,"firmware_auto_upgrade":true,"push_notifications":true,"sim":null,"push_notifications_level":"warning","test":false,"iot_registered":true,"mqtt_registered":true,"pin_code":"2304","registered_at":"2019-05-24 00:00:00","online":true,"app_settings":null,"protocol":0,"pending_radio_link_validation":null,"capabilities":["auto_lock","digital_fence_settings","lock","mqtt","multi_zone","multi_zone_percentage","one_time_scheduler","pairing_smartlink","pause_over_wire","rain_delay","rain_delay_start","safe_go_home","scheduler_two_slots","unrestricted_mowing_time"],"capabilities_available":[],"features":{"auto_lock":3.25,"chassis":"m_2019","digital_fence_settings":3.25,"display_type":"tube","input_type":"keyboard_tube","lock":true,"mqtt":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"one_time_scheduler":3.15,"pause_over_wire":3.26,"rain_delay":true,"rain_delay_start":3.08,"safe_go_home":3.25,"scheduler_two_slots":3.15,"unrestricted_mowing_time":true,"wifi_pairing":"smartlink"},"accessories":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"PRM100/98D86331BDA2/commandIn","command_out":"PRM100/98D86331BDA2/commandOut"},"warranty_registered":true,"purchased_at":"2019-05-22 00:00:00","warranty_expires_at":"2022-05-22 00:00:00","setup_location":{"latitude":49.27515948,"longitude":8.59441341},"city":{"id":3272456,"country_id":276,"name":"Sankt Leon-Rot","latitude":49.266392,"longitude":8.61667,"created_at":"2018-02-15 22:09:24","updated_at":"2018-02-15 22:09:24"},"time_zone":"Europe/Berlin","lawn_size":null,"lawn_perimeter":83,"auto_schedule_settings":null,"auto_schedule":false,"improvement":true,"diagnostic":true,"distance_covered":428770,"mower_work_time":28522,"blade_work_time":27518,"blade_work_time_reset":null,"blade_work_time_reset_at":null,"battery_charge_cycles":358,"battery_charge_cycles_reset":null,"battery_charge_cycles_reset_at":null,"created_at":"2019-03-11 12:55:07","updated_at":"2023-04-23 01:11:28","last_status":{"timestamp":"2023-04-25 15:20:48","payload":{"cfg":{"id":0,"sn":"zzzzzzz","dt":"25/04/2023","tm":"17:20:46","lg":"en","cmd":0,"sc":{"m":1,"d":[["11:00",30,1],["11:00",30,1],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"distm":0,"p":0,"ots":{"wtm":0,"bc":0}},"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":120,"al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"98D86331BDA2","fw":3.28,"fwb":1,"ls":0,"le":4,"conn":"wifi","bt":{"t":13.6,"v":18.32,"p":78,"nr":358,"c":0,"m":1},"dmp":[-14.6,-6.4,224.8],"st":{"b":27537,"d":429049,"wt":28542,"bl":83},"act":1,"rsi":-72,"lk":1,"tr":0,"lz":0,"rain":{"s":0,"cnt":0}}}},"last_gps_status":null}
25/04/2023, 17:27:45 DEBUG: Mower zzzzzzz is online
25/04/2023, 17:29:19 DEBUG: MQTT reconnect
25/04/2023, 17:29:19 DEBUG: mqtt closed
25/04/2023, 17:31:27 DEBUG: MQTT reconnect
25/04/2023, 17:31:27 DEBUG: mqtt closed
25/04/2023, 17:33:35 DEBUG: MQTT reconnect
25/04/2023, 17:33:35 WARN: Maybe your connection is blocked from Worx or your worx is offline. Restart Mqtt connection automatic in 24h
25/04/2023, 17:33:35 DEBUG: mqtt end
25/04/2023, 17:33:36 DEBUG: mqtt closed
VG Thorsten
Hallo Thorsten,
ja du bist tatsächlich wieder gesperrt. Das könnte am zweiten Mäher liegen. @matterazi hatte ja auch schon Probleme damit. Kannst du deinen 2. Mäher aus der Cloud abmelden oder ggf. auf einen 2. Account legen? Dann sollte das Problem weg sein.
Grüße
Jürgen
Hallo Jürgen,
ich komme jetzt regelmäßig folgende Fehlermeldung:
04.05.2023, 18:55:52 | FlowHandler | Kann Daten nicht zur Instanz #39118 weiterleiten:
Warning: Point hat denselben Start wie PointID 2 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 2 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 2 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 295
Warning: Point hat denselben Start wie PointID 2 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 2 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 295
Warning: Point hat denselben Start wie PointID 2 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
RESULT:
Früher hatte ich zwei Mähzonen und lief alles perfekt. Wir haben den Garten jetzt umgestaltet und nur noch eine Zone. Nach dem Ausschalten der Multi-Zonen in der App bekomme ich jetzt diese Fehlermeldungen.
Ich habe auch schon die Instanz „Scheduler“ gelöscht und neu installiert, leider ohne Besserung.
Kennt jemand diesen Fehler und wie kann ich den beheben?
Instanz 39118 aus der Fehlermeldung ist die Instanz „Schedule“.
VG Alex
Das löschen vom Wochenplan war leider nicht die Lösung.
Ich habe vorher alle Zeiten gelöscht, der Wochenplan war also leer. Danach den Plan in IPS gelöscht.
Der Wochenplan wurde wieder neu angelegt.
Sobald ich in der App einen neuen Plan von 10-11 Uhr am Mittwoch eintrage und speichere, kommt wieder diese Meldung.
Wenn der Plan ohne Zeiten ist, dann kommt kein Fehler. Logisch, da der Zeitplan ja ausgeschaltet ist.
Wie kann ich das lösen?
was sagt das Debug des Schedulers?
OK wir kommen der Lösung ein bisschen Näher.
Ich habe jetzt einen Timer für Donnerstag eingestellt. So sieht es in der APP aus.
Mein Wochenplan sieht jetzt so aus.
Hier noch das Debug:
dump.txt (5,3 KB)
Ich hoffe wir finden die Lösung.
VG Alex
Wenn ich den automatischen Zeitplan einschalte, dann kommt keine Fehlermeldung mehr.
Der Zeitplan sieht jetzt so aus:
dump_neu.txt (5,3 KB)
Sehr komisch
Hallo Jürgen,
ich habe heute noch ein bisschen getestet. Das Modul wurde komplett gelöscht, System neugestartet und wieder installiert.
Debug gestartet nachdem alle Werte neu angelegt wurden.
11:12 Uhr der Automatische Zeitplan eingeschaltet - keine Fehlermeldung.
11:15 Uhr Automatischer Zeitplan ausgeschaltet und gespeichert - keine neue Daten in IPS (logisch, da Zeitplan nicht geändert wurden)
11:17 Uhr einen beliebigen Tag den Zeitplan um 15 Minuten verlängert - Fehlermeldung kommt rein, aber der Zeitplan wurde korrekt übernommen.
05.05.2023, 11:17:18 | PHP | Error: Warning: Point hat denselben Start wie PointID 4
Error in Script C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on Line 302
137 in scripts\IPSLibrary\app\core\IPSLogger\IPSLogger.inc.php (call IPSLogger_Out)
37 in scripts\IPSLibrary\app\core\IPSLogger\IPSLogger_PhpErrorHandler.inc.php (call IPSLogger_Err)
in IPSLogger_PhpErrorHandler
302 in modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php (call IPS_SetEventScheduleGroupPoint)
75 in modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php (call SetIPSSchedule)
3 in C:\Windows\System32\- (call ReceiveData)
und
05.05.2023, 11:17:18 | FlowHandler | Kann Daten nicht zur Instanz #29618 weiterleiten:
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
Warning: Point hat denselben Start wie PointID 4 in C:\ProgramData\Symcon\modules\.store\silberstreifen.mqtt.worx\Scheduler\module.php on line 302
RESULT:
Jetzt noch das Debug
dump2.txt (16,0 KB)
Ich hoffe das Hilft.
VG Alex
Hallo Alex,
danke für die detailierte Beschreibung. Damit sollte ich den Fehler finden.
Grüße
Jürgen
Gerne
Falls du mehr Infos brauchst, dann melde dich einfach.
VG Alex
P.S. Nur zur Info, falls es relevant sein sollte. IPS läuft auf WIN 11, Vers. 6.4 Testing