Hallo zusammen,
ich versuche gerade den LAN Adapter in Betrieb zu nehmen, was mir aber leider nicht gelingen möchte. Der Adapter ist auf PLAIN konfiguriert:
C:\Program Files (x86)\BidCoS Service>lanif_config.exe list
IEQ0061431 0.961 Run 192.168.2.130/255.255.255.0 GW=192.168.2.254 DHCP PLAIN
Wenn ich den Test mehrfach aufrufe, kommt immer unterschiedlicher Müll vom Adapter zurück:
C:\Program Files (x86)\BidCoS Service>rfd -c -l 1
Config file is C:\ProgramData\Bidcos-Service\bidcos.conf
<Info> BidCoS-Service started
<Info> XmlRpc Server is listening on TCP port 2001
<Debug> Default interface is now IEQ0061431
<Error> IEQ0061431: Timeout waiting for hello message
<Warning> IEQ0061431: Invalid hello message received:
<Info> Disconnected from Lan Interface IEQ0061431
<Error> No BidCoS-Address set and no Interface to beg it from
C:\Program Files (x86)\BidCoS Service>rfd -c -l 1
Config file is C:\ProgramData\Bidcos-Service\bidcos.conf
<Info> BidCoS-Service started
<Info> XmlRpc Server is listening on TCP port 2001
<Debug> Default interface is now IEQ0061431
<Error> Invalid Message received: \x1f\x8dT\xc6t\xdf"\x91#\x12\x02\xa9\xe1\xbaG
<Warning> IEQ0061431: Invalid hello message received:
<Info> Disconnected from Lan Interface IEQ0061431
<Error> No BidCoS-Address set and no Interface to beg it from
C:\Program Files (x86)\BidCoS Service>rfd -c -l 1
Config file is C:\ProgramData\Bidcos-Service\bidcos.conf
<Info> BidCoS-Service started
<Info> XmlRpc Server is listening on TCP port 2001
<Debug> Default interface is now IEQ0061431
<Error> Invalid Message received: \x802\x1f<\x9f\xc94\xb7\xe0p\xea\x15T\xbdAz\xe
c\xe6\x7fZ\xb2\xb2\xe4\xef\xdd{`\xb3^ \x0f\x8d\xf3\xd9\x18\x06
<Warning> IEQ0061431: Invalid hello message received:
<Info> Disconnected from Lan Interface IEQ0061431
<Error> No BidCoS-Address set and no Interface to beg it from
C:\Program Files (x86)\BidCoS Service>rfd -c -l 1
Config file is C:\ProgramData\Bidcos-Service\bidcos.conf
<Info> BidCoS-Service started
<Info> XmlRpc Server is listening on TCP port 2001
<Debug> Default interface is now IEQ0061431
<Warning> IEQ0061431: Invalid hello message received: A0000000009000000000000000
0000000000000
Kann ich davon ausgehen, dass das Ding defekt ist?
Oder hat vielleicht noch jemand einen Geheimtipp?
Ich komm einfach nicht weiter…
Vielen Dank und viele Grüße,
Oliver