[07/11/2021 09:45:17] |
1 | IRP_MJ_CREATE - Opens a COM port (COM3) |
| STATUS_SUCCESS |
| | Opened by: |
| | | C:\Program Files\Symcon\ips.exe |
|
[07/11/2021 09:45:17] |
3 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
5 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 2 (EVEN_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
7 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
9 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x01 (SERIAL_DTR_CONTROL) |
| | | FlowReplace - 0x44 (SERIAL_ERROR_CHAR | SERIAL_RTS_CONTROL) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
11 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
13 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 2 (EVEN_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
15 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
17 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x01 (SERIAL_DTR_CONTROL) |
| | | FlowReplace - 0x44 (SERIAL_ERROR_CHAR | SERIAL_RTS_CONTROL) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
19 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_BAUD_RATE - Request sets the baud rate on a COM port. Serial verifies the specified baud rate |
| | | BaudRate - 9600 |
|
[07/11/2021 09:45:17] |
21 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_CLR_RTS - Request clears the RTS control signal |
|
[07/11/2021 09:45:17] |
23 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_CLR_DTR - Request clears the DTR control signal. |
|
[07/11/2021 09:45:17] |
25 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_LINE_CONTROL - Request sets the line control register |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
27 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_CHARS - Request sets the special characters that Serial uses for handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
29 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_HANDFLOW - Request sets the configuration of handshake flow control |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
31 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_TIMEOUTS - Request sets the timeout value's that the driver uses with read and write requests |
| | | ReadIntervalTimeout - 1 |
| | | ReadTotalTimeoutMultiplier - 0 |
| | | ReadTotalTimeoutConstant - 0 |
| | | WriteTotalTimeoutMultiplier - 0 |
| | | WriteTotalTimeoutConstant - 0 |
|
[07/11/2021 09:45:17] |
33 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 9600 |
|
[07/11/2021 09:45:17] |
35 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
37 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
39 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
41 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 9600 |
|
[07/11/2021 09:45:17] |
43 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
45 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
47 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
49 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_BAUD_RATE - Request sets the baud rate on a COM port. Serial verifies the specified baud rate |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
51 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_CLR_RTS - Request clears the RTS control signal |
|
[07/11/2021 09:45:17] |
53 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_CLR_DTR - Request clears the DTR control signal. |
|
[07/11/2021 09:45:17] |
55 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_LINE_CONTROL - Request sets the line control register |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
57 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_CHARS - Request sets the special characters that Serial uses for handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
59 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_HANDFLOW - Request sets the configuration of handshake flow control |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
61 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
63 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
65 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
67 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
69 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
71 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
73 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
75 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
77 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_BAUD_RATE - Request sets the baud rate on a COM port. Serial verifies the specified baud rate |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
79 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_CLR_RTS - Request clears the RTS control signal |
|
[07/11/2021 09:45:17] |
81 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_CLR_DTR - Request clears the DTR control signal. |
|
[07/11/2021 09:45:17] |
83 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_LINE_CONTROL - Request sets the line control register |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
85 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_CHARS - Request sets the special characters that Serial uses for handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
87 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_HANDFLOW - Request sets the configuration of handshake flow control |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
89 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
91 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
93 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
95 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
97 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
99 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
101 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
103 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
105 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_BAUD_RATE - Request sets the baud rate on a COM port. Serial verifies the specified baud rate |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
107 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_CLR_RTS - Request clears the RTS control signal |
|
[07/11/2021 09:45:17] |
109 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_CLR_DTR - Request clears the DTR control signal. |
|
[07/11/2021 09:45:17] |
111 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_LINE_CONTROL - Request sets the line control register |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
113 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_CHARS - Request sets the special characters that Serial uses for handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
115 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_HANDFLOW - Request sets the configuration of handshake flow control |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
117 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
119 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
121 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
123 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
125 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
127 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 0 (NO_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
129 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
131 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
133 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_BAUD_RATE - Request sets the baud rate on a COM port. Serial verifies the specified baud rate |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
135 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_CLR_RTS - Request clears the RTS control signal |
|
[07/11/2021 09:45:17] |
137 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_CLR_DTR - Request clears the DTR control signal. |
|
[07/11/2021 09:45:17] |
139 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_LINE_CONTROL - Request sets the line control register |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 2 (EVEN_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
141 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_CHARS - Request sets the special characters that Serial uses for handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
143 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_HANDFLOW - Request sets the configuration of handshake flow control |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
145 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
147 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 2 (EVEN_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
149 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
151 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
153 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_BAUD_RATE - Returns the baud rate that is currently set for a COM port |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
155 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_LINE_CONTROL - Request returns information about the line control set for a COM port |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 2 (EVEN_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
157 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_CHARS - Request returns the special characters that Serial uses with handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
159 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_GET_HANDFLOW - Request returns information about the configuration of the handshake flow control set for a COM port |
| | | ControlHandShake - 0x00 |
| | | FlowReplace - 0x04 (SERIAL_ERROR_CHAR) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|
[07/11/2021 09:45:17] |
161 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_BAUD_RATE - Request sets the baud rate on a COM port. Serial verifies the specified baud rate |
| | | BaudRate - 2400 |
|
[07/11/2021 09:45:17] |
163 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_RTS - Request sets RTS |
|
[07/11/2021 09:45:17] |
165 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_DTR - Request sets DTR |
|
[07/11/2021 09:45:17] |
167 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_LINE_CONTROL - Request sets the line control register |
| | | StopBits - 0 (1 stop bit) |
| | | Parity - 2 (EVEN_PARITY) |
| | | WordLength - 8 |
|
[07/11/2021 09:45:17] |
169 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_CHARS - Request sets the special characters that Serial uses for handshake flow control |
| | | EofChar - 0 |
| | | ErrorChar - 0 |
| | | BreakChar - 0 |
| | | EventChar - 0 |
| | | XonChar - 0 |
| | | XoffChar - 0 |
|
[07/11/2021 09:45:17] |
171 | IRP_MJ_DEVICE_CONTROL - Request operates a serial port (COM3) |
| STATUS_SUCCESS |
| | IOCTL_SERIAL_SET_HANDFLOW - Request sets the configuration of handshake flow control |
| | | ControlHandShake - 0x01 (SERIAL_DTR_CONTROL) |
| | | FlowReplace - 0x80000044 (SERIAL_ERROR_CHAR | SERIAL_RTS_CONTROL) |
| | | XonLimit - 2048 |
| | | XoffLimit - 512 |
|